100w Fast Charging Power Bank Circuit Board Module
100w Fast Charging Power Bank Circuit Board Module
SPECIFICATIONS
Brand Name: Aideepen
Choice: yes
Condition: New
High-concerned chemical: none
Origin: Mainland China
Type: Module
Discover the Aideepen Power Bank Module, engineered to meet diverse charging needs with advanced technology and robust safety features, ideal for DIY enthusiasts and professionals alike.
Key Features & Benefits
- Universal Compatibility: Supports multiple fast charging protocols including QC, PD, PPS, SCP, VOOC, ensuring seamless charging for a wide range of electronic devices.
- Solar Panel Charging: Integrated MPPT functionality enables efficient charging using solar energy, perfect for eco-conscious and off-grid users.
- Intelligent Voltage Switching: Automatic buck-boost conversion with PWM and PSM mode switching protects your devices from overcharging and optimizes charging efficiency.
- Comprehensive Safety: Equipped with overcurrent, overvoltage, short-circuit, and overtemperature protections, guaranteeing user safety and device longevity.
- Fast Bidirectional Charging: Rapid output charging coupled with swift PD bidirectional charging reduces downtime and enhances user convenience.
- Stable Power Output: Features large-capacity solid-state capacitors for low ripple output; USB-C port voltage ripple as low as 6-9mV ensures superior device protection.
- DIY Friendly: Clear circuit layout with detailed annotations facilitates straightforward assembly and debugging, perfect for custom power bank projects.
Product Specifications
Mainboard includes 4 default USB ports: Type-C1, Type-C2, Type-A1, Type-A2.
Type-C1 and Type-C2 support AFC, FCP, SCP, PD3.1 input protocols.
Output protocols supported: PPS, PD3.1, UFCS, PE1.1, PE2.0, QC3+, QC3.0, QC2.0, AFC, FCP, SCP, SFCP.
Type-A1 and Type-A2 support UFCS, PE1.1, PE2.0, QC3+, QC3.0, QC2.0, AFC, FCP, SCP, SFCP output.
Voltage, Current & Power Details:
- PPS/PD3.1: 20V@5A, 3.3V-21V@5A, Max input 100W / Max output 60W.
- UFCS: 3.4-21V@5A, Max input 100W / Max output 60W.
- QC2.0: 5V 3A / 9V 3A / 12V 2.8A / 20V 1.5A.
- QC3.0: 3.6V-20V @ 200mV/step; 5V @ 3A / 9V @ 3A / 12V @ 2.8A / 20V @ 1.5A.
- QC3+: 3.6V-20V @ 20mV/step; 5V @ 3A / 9V @ 3A / 12V @ 2.8A / 20V @ 1.5A.
- AFC and FCP: 5V 3A / 9V 3A / 12V 2.8A.
- SCP: Output 3.3V-12V, Input 5V/9V/10V/12V, supports 10V 4A.
- PE1.1: 5V / 7V / 9V / 12V.
- PE2.0: 5V-12V @ 500mV/step.
- SFCP: 5V / 9V / 12V.
The motherboard must be connected to the battery according to the provided diagram. If the battery includes a built-in protection board, connect its positive and negative terminals to the motherboard's B+ and C- pads. For motherboards with integrated protection, wiring must strictly follow the diagram including the balancing wire to ensure proper activation and functionality.
Important Usage Notes
- Use battery cables rated for 10A current, with a minimum copper wire cross-section of 1mm² (1.5mm² standard recommended). Avoid thin cables to prevent safety risks. 16AWG wire is ideal.
- The built-in protection chip accommodates 2-5 series batteries. For higher series (6 or 7), batteries must have independent protection boards rated over 15A to ensure safety and prevent motherboard damage.
- Due to high current at battery terminals, solder thick wires directly to batteries for testing. Avoid using alligator clips on pads for charging/discharging tests.
- Supports OPO Flash Charge and HW Super Fast Charge protocols. Power outputs vary by protocol: PD supports 65W/100W; VOOC supports 20W; SCP provides 22.5W. Verify phone compatibility prior to purchase. Returns for unsupported fast charging are not accepted, nor for soldered units.
- Ensure batteries connected are within specifications and wired in series for optimal performance.
Package Contents
- Power Bank Module ×1
- 15cm Equalization Cable ×1
